Installation and Use of Double Screw Mixer

The installation and use of the mixing part of the Double Screw Mixer directly affects the mixing effect and production capacity. Since the stirring shafts are relatively slender and the distance between the bearing seats is relatively long, improper installation and use can easily cause the shaft to deflect, deform or even break during operation.

Therefore, special attention should be paid to the installation and use of the double-shaft humidifying mixer. The manufacturer of the vacuum mixer said that the looseness of the fixing bolts of the foot or bearing seat, the damage of the bearing or the wear of the gear may cause the vibration of the shaft, uneven feeding or foreign matter entering, resulting in overloading, increasing the load, and may cause the shaft to vibrate or break , These are to be avoided in the production process. the

The operation process of Double Screw Mixer is the process of mixing and grinding materials. Vacuum mixer manufacturers said that familiarizing with its operating principle and matters needing attention can make the humidifying mixer operate better and maintain a good working condition. A mixer is a mechanical device that evenly mixes materials and is widely used in many industrial sectors. According to the vacuum mixer manufacturer, the mixer can be divided into two types: single-axis and double-axis according to the number of shafts. The single-axis mixer has only one main shaft, and the humidifying mixer has two parallel main shafts.

The mixing knife of Double Screw Mixer can be a continuous spiral or a single blade. When using a discontinuous spiral mixing knife, the helix angle can be adjusted. Humidifying mixers can be divided into two types: co-current and counter-current. When the concurrent flow humidifying mixer is stirring, the two main shafts turn in opposite directions, the rotation direction of the spiral mixing knife is also opposite, and the materials flow forward in the same direction. The manufacturer of the vacuum mixer said that when the countercurrent humidification mixer is stirring, the two main shafts turn in opposite directions, but the rotation direction of the spiral mixing blade is the same, and the materials go back and forth, and are mixed and stirred for a long time. Of course, the speed of sending to the discharge port should be slightly faster than the speed of reverse transportation, so that the material can be unloaded.